Tailored Navy Trousers – Refined Smart Fit
| UK Size (Waist) | Waist (cm) | Hip (cm) | Length (cm) |
|---|---|---|---|
| 28 | 71 | 91 | 96 |
| 29 | 74 | 94 | 97 |
| 30 | 76 | 96 | 98 |
| 31 | 79 | 99 | 99 |
| 32 | 81 | 101 | 100 |
| 33 | 84 | 104 | 101 |
| 34 | 87 | 106 | 102 |
| 36 | 91 | 111 | 104 |
UK size refers to waist size in inches. Measurements are shown in centimetres. If between sizes, choose the larger size for a more comfortable fit.
How to Measure Trousers
1. WAIST:
To measure the waist, first fasten the trousers. Then lay them flat on a smooth surface, removing any excess fabric and wrinkles.
2. RISE:
With the trousers fastened, lay them flat on the floor or a table. Smooth out any wrinkles and measure this area starting from the crotch seam up to the top of the waistband.
3. HIP:
Measure around the hip area, which is usually about 1½ inches below the zip.
4. THIGH:
Measure from the crotch seam to approximately 2.5–5 cm below the hip area.
5. LENGTH:
With the trousers fastened, lay them flat on a table, floor or any flat surface, ensuring the outer seams are aligned at both ends. After smoothing out wrinkles or excess fabric, measure from the top of the waistband to the hem.
6. KNEE:
Remove any wrinkles or excess fabric if necessary. Measure around the knee area.
7. INSIDE LEG:
With the trousers fastened, lay them flat on a smooth surface. Measure the inside leg from the crotch seam (where the front and back seams meet) down to the desired length.
8. LEG OPENING:
Finally, following the same method as above, lay the trousers flat on a table or floor. After removing wrinkles or excess fabric, measure from one side of the leg opening to the other.