Men’s Two-Piece Tracksuit Set
Size Guide
| Size | Shoulder (cm) | Chest (cm) | Length (cm) | Recommended Height | Recommended Weight |
|---|---|---|---|---|---|
| S | 42 | 102 | 65 | 160–165 cm | 50–55 kg |
| M | 44 | 106 | 67 | 165–170 cm | 55–60 kg |
| L | 46 | 110 | 69 | 170–175 cm | 60–68 kg |
| XL | 48 | 114 | 71 | 175–180 cm | 68–78 kg |
| XXL | 50 | 118 | 73 | 180–185 cm | 78–88 kg |
| 3XL | 52 | 122 | 75 | 185–188 cm | 88–95 kg |
Measurements are in cm. Use chest and shoulder for best fit. Allow 1–2 cm variation due to manual measurement.
How to Measure
1. COLLAR:
Measure around the base of the collar where it sits on the neck. Ensure the collar is laid flat without stretching.
2. SHOULDER:
Measure across the back from one shoulder seam to the other, keeping the shirt flat and wrinkle-free.
3. SLEEVE LENGTH:
Measure from the shoulder seam down to the end of the cuff. Make sure the sleeve is fully extended and smooth.
4. CHEST:
Measure across the chest from armpit to armpit, ensuring the shirt is laid flat without wrinkles.
5. WAIST:
Measure across the waist area of the shirt, keeping the garment flat and aligned.
6. HEM WIDTH:
Measure across the bottom of the shirt from one side to the other.
7. CUFF:
Measure the width of the cuff from one edge to the other while laid flat.
8. SHIRT LENGTH:
Measure from the highest point of the shoulder down to the bottom hem of the shirt.
Size Guide
| Size | Waist (cm) | Hip (cm) | Length (cm) | Recommended Weight | Recommended Height |
|---|---|---|---|---|---|
| S | 68 | 92 | 98 | 50–55 kg | 160–165 cm |
| M | 71 | 96 | 100 | 55–60 kg | 165–170 cm |
| L | 74 | 100 | 102 | 60–68 kg | 170–175 cm |
| XL | 77 | 104 | 104 | 68–78 kg | 175–180 cm |
| XXL | 80 | 108 | 106 | 78–88 kg | 180–185 cm |
| 3XL | 83 | 112 | 108 | 88–95 kg | 185–190 cm |
Measurements are in cm. Use chest and shoulder for best fit. Allow 1–2 cm variation due to manual measurement.
How to Measure
1. WAIST:
To measure the waist, first fasten the trousers. Then lay them flat on a smooth surface, removing any excess fabric and wrinkles.
2. RISE:
With the trousers fastened, lay them flat on the floor or a table. Smooth out any wrinkles and measure this area starting from the crotch seam up to the top of the waistband.
3. HIP:
Measure around the hip area, which is usually about 1½ inches below the zip.
4. THIGH:
Measure from the crotch seam to approximately 2.5–5 cm below the hip area.
5. LENGTH:
With the trousers fastened, lay them flat on a table, floor or any flat surface, ensuring the outer seams are aligned at both ends. After smoothing out wrinkles or excess fabric, measure from the top of the waistband to the hem.
6. KNEE:
Remove any wrinkles or excess fabric if necessary. Measure around the knee area.
7. INSIDE LEG:
With the trousers fastened, lay them flat on a smooth surface. Measure the inside leg from the crotch seam (where the front and back seams meet) down to the desired length.
8. LEG OPENING:
Finally, following the same method as above, lay the trousers flat on a table or floor. After removing wrinkles or excess fabric, measure from one side of the leg opening to the other.